NE Auto Tech

mechatronic

DSG Mechatronic Testing

Posted on: October 9th, 2020 by NEAT

DSG Mechatronic Testing

By carrying out DSG Mechatronic testing instead of replacing the whole unit we can save you money as well as not just getting rid of parts unnecessarily. DSG Gearbox repair work has become more and more common on Volkswagen, Audi, SEAT and Skoda vehicles.

If you go to the dealership for a DSG repair or S Tronic repair, you will only be offered a replacement option at thousands of pounds. We repair and pass on the savings of on average 40%.

The internal housing is common for cracking. Luckily we can carry out a repair procedure on this and not have to replace the whole mechatronic unit.

You’ll notice there is a fault if any of these things occur.

  • It comes up on the display saying ‘Gearbox fault visit workshop’
  • The ‘PRNDS’ lights are flashing.
  • Loss of drive
  • Missed gears on selection
  • No reverse gear
  • Clutch failure (struggling to engage gears or loss of drive)

If any of these things are happening with your VAG vehicle, get in touch with us via email or call the reception on 01642 613852. We can diagnose the fault, give you a price on the repair and save you £££ in doing so!

See our Youtube videos attached which show the mechatronic testing.

This video below is before the repair was carried out. As you can see on the machine, the unit has no pressure and is not reaching the requirement.

Once repaired, the machine is clearly showing the pressure has been reached and test is carried out.

 

 

 https://www.northeastautotech.com/dsg-gearbox-repair/

 

https://www.vag-performance.co.uk/


DSG gearbox repair P189C/006300

Posted on: February 3rd, 2019 by NEAT

dsg gearbox repair

DSG gearbox repair P189C/006300

,DSG gearbox repair P189C/006300 is becoming ever more common. A fault code normally found with this fault is;

  • 16946/P0562/001378 – System Voltage Low
  • 005636/P1604 – Internal Control Module
  • P189C/006300 – Function restriction due to insufficient pressure build-up

Your local dealership will unfortunately only offer you a complete new unit instead of offering a repair. We have the solution! In most instances it is possible to carry out a repair on the mechatronic unit in the DSG gearbox.

In our car garage this week, we were presented with another vw golf with another gearbox warning light on the dash. We carried out some quick and cost effective diagnostics to find fault code P189c 006300 stored in the DSG ECU fault memory. From vast experience in this we carried out some further tests to find a failure in the DSG mechatronic gearbox unit.

Our repair procedure found this vehicles DSG gearbox mechatronic repaired at a cost effective price and back on the road.


Copyright © 2024 NE Auto Tech